![]() |
|
![]() |
#1 | ||
lunja
Join Date: May 2007
Location: Melbourne, Northern Suburbs
Posts: 4
|
hi guys my name is alen, im new to ford forums... i would like know how to pass my wires for a amplifer through the firewall of a LS zetec. whats the safest way i can do this without being to intrusive and causing too many problems.
Thanks |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Guest
Posts: n/a
|
Gday Alen,
On the firewall behind the battery box is a large grommet with some cabling loom coming out. Make a hole at the top of the grommet and you can pass the power cabling from this. I am running 4 or 2 guage wiring through here. |
||
![]() ![]() |
![]() |
#3 | ||
AFF Post NAZI
Join Date: Mar 2006
Location: Albury
Posts: 3,634
|
ON my Fiesta, i simply just attached the power cable to the end of a long long screw driver and just forced the screwdriver through the gromet along the wires.. then grabed the wire from the other end. then simple jsut pulled the screw driver out from the side it went in... and Presto.!
__________________
"Its not always about power, The car has to handle Beautifully" |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
lunja
Join Date: May 2007
Location: Melbourne, Northern Suburbs
Posts: 4
|
Thanks guys this makes it much easier for me, hopefully a job i can complete this weekend.
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Melbourne
Posts: 2,035
|
Welcome to the forums Lunjatec. Be sure to check out www.eurofordclub.com if you are looking for a car club. We have our own section on this forum also. Hope you enjoy the experiance with your car.
__________________
2015 MK7 VW GOLF GTI __________________
Previous Cars 2002 AUIII XR6 1995 EF Falcon XR6 2003 LR Focus Zetec 1989 KE Laser TX3 |
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|