Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 03-07-2007, 12:52 PM   #1
Pazuzu
Regular Member
 
Join Date: Feb 2007
Posts: 82
Default Interesting drop in revs- Mk 2 2.0L Escort

Hi all.

While cruising out near Wiseman's Ferry the other day, I noticed that my tacho was reading about half of what it should, i.e. reading a little over 1,000 while I was sitting on 60 in 4th gear. The engine sounded right, like it was doing a bit over 2,000 r.p.m., but when I got it back to the garage it was idling at around 400, and would stall as soon as I took my foot off the gas (yes, it was in neutral!) I've set the idling speed at about 750- 800, so it seems to have halved somehow.
Has this kind of thing happened to anyone else? I've just rekitted the carbie, and -farted around with the vacuum hoses, but my mate reckons it has been doing it on and off the last few times he's taken it for a spin, before I fiddled around with these things.

Any thoughts as to what could be doing this?

Pazuzu is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2007, 03:29 PM   #2
grey_esp
Greys tuf too :-)
 
grey_esp's Avatar
 
Join Date: Apr 2005
Location: Perth, SOR
Posts: 596
Default

Is it a monster or an after market tach with a switch on the back for 4, 6 or 8 cly? because the switch has probably vibrated into the 8 position.
grey_esp is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2007, 05:09 PM   #3
whooligan
FF.Com.Au Hardcore
 
whooligan's Avatar
 
Join Date: Dec 2005
Posts: 556
Default

While idling, pump the brake peddle. If the revs drop when you apply the brake, its clearly a vacuum problem. If its stalling on idle, its probably crank case ventilation. ie PC valve get gunked up with crap. Just wash it out with WD40 and re-check all your hoses on the inlet manifold for air leaks.
whooligan is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:10 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL