![]() |
|
![]() |
#1 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Hey guys trying to check trans fluid on my kh laser 1.6l carby 3 speed auto. When cold oil shows up to full line. Take for quick 5 min drive, then put through all gears an back to park. I check then wipe clean bout 3 times over oil looks like just above low line but when i look closely it does go up to full line just very thin looking in between low and full. Which reading would be correct? Also is it hard to fit a trans filter kit?
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
tranny oil level is good
what was its colour/smell 1.6 motor trans filter kit has internal filter and a pan gasket so drop the pan .refill through the dipstick http://www.rycofilters.com.au/catalo...ASER/series/KH http://www.rycofilters.com.au/catalogue
__________________
My car goes Brumm Brumm |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Thanks yeah 1.6 motor, oil is dark red
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Smell I'm not sure I'll have to get back to you when it's not dark
|
||
![]() |
![]() ![]() |