|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
28-06-2017, 08:27 PM | #1 | ||
Regular Member
Join Date: Dec 2012
Posts: 48
|
Anybody had discs and pads replaced on their ST? Whats a good price? Recomended parts if not oem?
Ford wants $950 for oem. Pedders around $1100 but forget the brand. For reference its done 105k km. Not sure if thats early for discs, but i was told they are worn just below minimum spec. Only on its second set of pads though. |
||
28-06-2017, 09:42 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2016
Location: Victoria
Posts: 659
|
Is this for front and back? Labor included?
For parts, Motorcraft front pads for an LW are only $48, Ford OEM are $99, I doubt ST pads would be hugely more expensive...try another dealer or go to a Ford Parts Superstore. |
||
29-06-2017, 07:41 AM | #3 | ||
Regular Member
Join Date: Dec 2012
Posts: 48
|
Front and rear. Yeah pads are cheap. It's the discs I can't find part prices to compare to.
|
||
29-06-2017, 09:31 AM | #4 | ||
Mad Scientist!
Join Date: Jan 2005
Location: Newcastle
Posts: 2,861
|
Get in contact with site sponsor 'Race Brakes'
They will help you out |
||
03-07-2017, 06:23 PM | #5 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Has it got the standard 278mm front rotors (DBA2118E), or 300mm (DBA2120) ones?
Rears will be DBA2145. Ebay is your friend - I use ADB discs, but you could go for RDA or DBA DBA front 2120 T2s for $280 a pair: http://www.ebay.com.au/itm/DBA-T2-Sl...kAAOSwax5Yv7GF
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
03-07-2017, 06:48 PM | #6 | ||
Regular Member
Join Date: Dec 2012
Posts: 48
|
It's standard. Not sure if that is 280 or 300mm on the ST.
But thanks for the part numbers and I will check with race brakes too. |
||
04-07-2017, 06:23 AM | #7 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,236
|
There were actually 3 rotor sizes available for the front: 278mm 300mm and 320mm.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
This user likes this post: |
05-07-2017, 11:00 PM | #8 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
From what I can work out, 320mm were on XR5, 300mm on ST, and 278mm on everything else.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
26-07-2017, 10:09 AM | #9 | ||||
FF.Com.Au Hardcore
Join Date: Jan 2016
Location: Victoria
Posts: 659
|
Interesting. My rear brake set has stamped on the box compatibility with he following:
Quote:
Quote:
|
||||