Wheels That Fit Brembo Brakes

[irvinnie]

The won't fit the rears in a staggered figment without using spacers

[phantom_87]

Stance sc5 clear 6 piston calipers 20× 8.5 size rim
Still yet to put the rear 4 piston calipers on

[FLOORED]

This was a current job we did fitting the Brembo 6/4 combo to some chrome wheels i hadn't seen before.

[phantom_87]

Finally got the rear 4 piston calipers on. I can confirm stance sc5 in 20×10 dont not clear the rear brakes.

[phantom_87]

Ok i swapped the 20x10 for a 20x8.5 eith 35mm offset and the now clear the rear 4 piston calipers

[Grippy]

Has anyone tried to fit BA XR 17's over 4 pot Brembo fronts? I spotted this BA XR6 Turbo track car at Phillip Island today with 4 pots squeezed under BA 17's. I'm wondering if he was running a smaller disk to make them fit? I'd love to run 17's on my Brembo equipped AU if they do indeed fit.

[Grum]

Yes, they fit. only OEM 17 that does.

Interesting car that one, I have done a bit of work on it in the past. How close a look did you have? It has a few secrets.

[Grippy]

Originally Posted by Grum

Yes, they fit. only OEM 17 that does.

Interesting car that one, I have done a bit of work on it in the past. How close a look did you have? It has a few secrets.

Thanks Grum, guess ill be keeping my Toyo R888 17's and hunting for a set of BA XR6 wheels.

I only had a quick look as the brakes caught my attention. From what I can tell it's one of 2 factory Ford Targa Tasmania entered BA XR6 Turbo's when released back in 2003.

[Grum]

Originally Posted by Grippy

Thanks Grum, guess ill be keeping my Toyo R888 17's and hunting for a set of BA XR6 wheels.

I only had a quick look as the brakes caught my attention. From what I can tell it's one of 2 factory Ford Targa Tasmania entered BA XR6 Turbo's when released back in 2003.

It was never a factory built road car. It was built as a prototype test car.

These are under the bonnet:

[FLOORED]

We also used to do a 336mm front rotor with a Brembo 4 pot back in the day.

[SIMBAD]

Originally Posted by Grum

Yes, they fit. only OEM 17 that does.

Interesting car that one, I have done a bit of work on it in the past. How close a look did you have? It has a few secrets.

Do the ba mk2 17" wheels fit as well?

[Grum]

Originally Posted by SIMBAD

Do the ba mk2 17" wheels fit as well?

Originally Posted by Grum

Yes, they fit. only OEM 17 that does.

Interesting car that one, I have done a bit of work on it in the past. How close a look did you have? It has a few secrets.

as above

[SIMBAD]

Originally Posted by Grum

as above

Ok cheers. The ba 17s fit and ba mk2 17s do not fit.

[WyldOne]

Can some with FPV GS rims 36.5 offset please confirm if they fit 6/4 brembos?

[Wolfinsheepsclothing]

Yes they sure do 100%

[unr33l]

Sure do:

[data_mine]

the GS rims originally came from the BF GT-P (standard with 6/4s)

[Professor Farnsworth]

And I've been chasing a good condition set for weeks, no joy.

[ivanflo]

http://www.stgeorgetyres.com.au/pack...ct-detail.aspx

I was in the market for staggered 18 inch wheels and...
Apparently these 17 inch wheels clear Brembo's?

I believe them to be XXR 550's, anyone had any experience with XXR?

[HI PSI]

Matt from Race Brakes Sydney is currently investigating modifying a rotor hub and brackets, so that I can fit Brembo's behind normal wheels. I'll keep you posted on further developments.

[FLOORED]

Originally Posted by HI PSI

Matt from Race Brakes Sydney is currently investigating modifying a rotor hub and brackets, so that I can fit Brembo's behind normal wheels. I'll keep you posted on further developments.

The rotor is a two piece option and will run bobbins (which are being manufactured) and just waiting on them to proceed.

[jakkes]

Originally Posted by HI PSI

Matt from Race Brakes Sydney is currently investigating modifying a rotor hub and brackets, so that I can fit Brembo's behind normal wheels. I'll keep you posted on further developments.

hi matt did this ever progress any further ?????

[HI PSI]

Originally Posted by jakkes

hi matt did this ever progress any further ?????

I believe that they did a floating rotor variation. I wasn't happy with the likelihood of inherent noise associated with that design. I ended up using a 360 mm rotor and hat from an Alcon kit. I heard to modify the caliper bracket to suit the reduced offset of the rotor.

https://m.imgur.com/gallery/il1Pg

[FLOORED]

Originally Posted by jakkes

hi matt did this ever progress any further ?????

No we didn't sorry.

[98TLS]

Way back when i had just bought my GTP i posted that the BBS 18s fitted over the Brembos at that stage i hadnt had the rims off car but when i did it revealed 5m spacers had been fitted,i mentioned at the time how little gap there was,they wont fit without the spacers,sorry meant to post this up ages ago but simply forgot.

[08G63T]

Would someone know if the following wheels will fit over 6pot brembos?

- Lenso Speed 2 in 19X8.5 Front and 19X9.5 Rear with P35 or P40 offset
- XXR 527 in 19X8.75" Front and 19X9.75" Rear with P38 offset

I'm going to assume guards will need to be rolled

[Sunburst XR50T]

Guys I'm wondering if anyone knows if 19" XR50 Turbo wheels will fit over the 6 pot Brembos? Or anyone in Sydney with 6 pots that I could see if my wheel fits over?

Cheers.

[irvinnie]

50th anniversary rims won't fit over brembos. I had to change rims on my ute when I fitted 4 pot brembos

[SIRGTP]

Koya SF06...

20x9.5 front +22 clear easily over 6 pots and 20x11 +37 rear just clear rear 4 pots...

[Six6]

Can anyone confirm if Vertini Drift 19" x 8.5 +30 fit over 6 Piston brembo brakes? I can confirm that +25 do.