![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | ||
Starter Motor
Join Date: Aug 2013
Posts: 19
|
Hi
I am currently trying to pick up a few MPG on my mileage and was wondering is it even possible to advance the timing 3 or 4 degrees on a laser?? Do I need to do anything other than rotate the dizzy? Not overly concerned about pinging as all low speed low load short hop city driving. My recollection with my Holden dunnydoor VH was as lead was removed from petrol and detonation set in I had to retard timing and it ran like a dog. I had always put my holden forward a degree or two and it had nice around town driveabilty / consumption. Thanks in advance |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Starter Motor
Join Date: Aug 2013
Posts: 19
|
anyone?
PS is it because I keep talking about my holden you wont answer?? Last edited by 080; 20-10-2013 at 11:30 PM. |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Jun 2013
Posts: 23
|
hahaha, no mate i forgive you for your mistakes..;). Im just unsure about it, try it and see thou really, i run mine on 96 fuel only so i think the timing is advanced, but not sure how much..!
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Mar 2008
Location: Bendigo, Victoria
Posts: 988
|
get a timing light. Do a google search or get a repair manual if it's a EFI model as it may need a wire bridged/earthed etc. set it maybe like 2 degrees before the factory setting.
And pinging, you should be worried. Decent engine damage can happen from pinging
__________________
Daily driver: 2010 Toyota Crown Hybrid. 20" SSR Professor MS3 wheels, Tein coil overs. Weekend car: AU2 "XR8" 220kw 5 speed. 19" BBS LM. Full exhaust. Lowered. XR leather interior. 13.8@97mph Weekend driver: EA SVO - AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. 425rwkw. Built and road tuned by myself. 10.8@ 126mph |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Starter Motor
Join Date: Aug 2013
Posts: 19
|
Thanks for those.
Always got an ear out for the pinging. Never had anything damaged but I know it can. Just low speed tonkin' around town so it should be OK. Took the car out for a run in the country and city milage is much better to now too. OH look!! One whole post without mentioning holden. (doh!!) ;) Cheers |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Ahh Holden, I remember the good old days when if you let the 202/3.3l motor ping without correcting it, you could very likely lose the top off one or more pistons. Happened to me and took some time before I could see the street through the massive clouds of oil smoke. Meanwhile, what pressure do you run your tyres at? Adding 5 or more psi will improve economy but say goodbye to the armchair ride. I run my 195x55x15 razor blades at 36 round town and 40psi on highway and get excellent economy. Of course, I look after all the other relevant things like plugs, leads, filters and correct fuel for the car.
|
||
![]() |
![]() ![]() |