![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Sep 2020
Posts: 2
|
Hi,
bought a reverse camera for my focus 2007 Sedan LT and just wandering if anyone knows if i can tap into the reverse signal wire from the front of the car rather than pulling it from the back light assembly? Cheers D |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
if it is a manual you can use the reverse switch on the gearbox
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Sep 2020
Posts: 2
|
yaaaaas it is
![]() and where is the reverse switc? |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
on my tdci it was on top of the box mid way along slightly toward the front has a two wire clip on it
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#5 | ||
FF.Com.Au Hardcore
Join Date: Jun 2009
Location: Adelaide
Posts: 1,024
|
Lots of fun to get to on petrol version.
I'd stick to the wire at the very back, under the rear bumper lip. use a cable splicer. Couldn't tell you where that leads at the front of the vehicle.
__________________
XG Falcon Ute, XE Fairmont Ghia & BA Mk II Falcon SR |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
FF.Com.Au Hardcore
Join Date: Apr 2014
Location: NSW
Posts: 1,610
|
Run reverse lights wire with camera cable to rear and connect to reverse lights -some camera cables already have reverse cable already in the same cable next to the connecting plug
|
||
![]() |
![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|