![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
fte or fpv, mmmm....
Join Date: Dec 2009
Posts: 129
|
My outer control arm bushes are flogged out on the top and bottom IRS control arms in my car.
Only the bottom of these bushes are available from Ford and Nolathane, where can I get the top bush? can I just use a bottom control arm bush in the top? Has anyone changed these themselves? Thanks Mark |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Perth NoR
Posts: 5,970
|
They aren't a bush as such, but a spherical joint. You need a press to remove and install the new units. Top and bottom are different, there is no aftermarket available for the top joint and the Ford unit is now obsolete. The only solution I have found is to use a BA-BF one, but it is narrower and you'll need a spacer washer at either end of the joint.
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
Regular Member
Join Date: Oct 2005
Location: Townsville
Posts: 260
|
You can also buy a tool off e bay to remove and replace the top bush $30 + postage. The tool is for a BA but as was previousely said the bush that replaces the AU one is now the BA one. It should work fine. I have bought it but have yet to try it. The bush in mine is not flogged out its just squeeky
|
||
![]() |
![]() ![]() |
![]() |
#4 | |||
fte or fpv, mmmm....
Join Date: Dec 2009
Posts: 129
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#5 | ||
Sick Puppy
Join Date: Jul 2006
Posts: 1,963
|
Im interested in a link to the tool myself.
|
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Regular Member
Join Date: Oct 2005
Location: Townsville
Posts: 260
|
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Regular Member
Join Date: Oct 2005
Location: Townsville
Posts: 260
|
Tried the tool today. The bush is in that tight it didnt budge a mm. I ended up stripping the bolt on the tool. I am going to try again tomorrow this time with a little heat. I dont think its the tools fault that it stripped. I may have been a little heavy handed.
|
||
![]() |
![]() ![]() |
![]() |
#8 | ||
Regular Member
Join Date: Jul 2012
Posts: 108
|
FWIW Superpro bushes for AU IRS are now available, saw these the other day while browsing ebay
http://www.ebay.com.au/itm/Falcon-Fa...item460ae368af |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Regular Member
Join Date: Oct 2005
Location: Townsville
Posts: 260
|
Tried again today. The bush didnt budge at all. Tried heating it and hitting with a hammer but no movement at all. Looks like a trip to pedders. I think the tool I got from ebay was a good idea but in my case the whole arm will need to come out and placed on a 12 ton press.
|
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Starter Motor
Join Date: Jan 2011
Location: Melbourne
Posts: 20
|
These bushes look the goods, set of 4 upper and lower :
https://www.ebay.com.au/itm/Ford-AU-...-/113763233821 Cheers
__________________
T1 TL50 Build No. 014 - Liquid Silver T1 TL50 Build No. 017 - Liquid Silver, Sunroof |
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Starter Motor
Join Date: Jan 2011
Location: Melbourne
Posts: 20
|
This link works, the other one has expired.
Many units sold and positive feedback. Plus lots of information in the description. Cheers https://www.ebay.com.au/itm/Ford-AU-...-/114345581207
__________________
T1 TL50 Build No. 014 - Liquid Silver T1 TL50 Build No. 017 - Liquid Silver, Sunroof |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
Thread Tools | |
Display Modes | |
|