Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 27-02-2010, 10:18 AM   #1
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Question Unichip Box??

Hi All,
I have just started to put a new head unit in my AU2 XR8. I was getting rid of the wires that ran to the CD stacker and as i pulled the front carpet up i found in the bubble wrap a Unichip engine control unit. WTF is that doing there and was it a stock item ford??
Now as i have been having problems with my car ( It feels like there is a massive flat spot when i boot the car, its revs okay if i feather the accel. but if i boot it it dies in the *** and then will take off but sounds like it is missing ) could this have anything to do with it???

Thanks

__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 10:29 AM   #2
The Monty
Just slidin'
 
The Monty's Avatar
 
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
Default

Unichip's are a chip used to tune the car via dyno and computer. Are there any other mods to the car?
__________________
MD Mondeo - For the family
NP Pajero - For the adventure
The Monty is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 11:03 AM   #3
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

Not that i am aware of. I did buy the car 2nd hand and not much info was supplied with the car.
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 11:06 AM   #4
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

So i have just contacted C&V performance and they are saying that it has lost its tune. And that is what is causing all my problems, $400 to retune it.

But just spoke to someone local who has said they are a pile of crap and i should get it taken out????

Any suggestions?
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 01:02 PM   #5
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

Does anyone know where i can get some info on taking the unichip out of the car?
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 01:16 PM   #6
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

pm b2tf, he will tell you all about how "good" his unichip was in his old xr8 ute...
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 01:49 PM   #7
StealthAu
FF.Com.Au Hardcore
 
Join Date: Sep 2006
Posts: 2,981
Default

it all comes down to who's doing the tuning, there are plenty of people that have had unichips and say they are crap, others have used them and say they are great.
StealthAu is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 02:59 PM   #8
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,616
Default

I have a Unichip in mine from new vertually and havn't had a single problem what so ever, run's beautifully, idle is smooth and the economy and power has improved some what that I am happy.
I have not had any experiance's with the new Stealth edit's but from what I hear it is miles ahead of it's capabilities over the Unichip,
If you plan to mod it in the future I would look at the Stealth edit.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 04:12 PM   #9
Peuty
Afterburner + skids =
Donating Member1
 
Peuty's Avatar
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,112
Default

They are crap. Pull it out and run it over.
__________________
Speed Kills. So buy an AU XR8 and live forever.

Oo\===/oO
Peuty is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 04:44 PM   #10
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Bahahaha, the old Unichip. Havent seen one in ages.

Rip it out and use it as a doorstop - will give you more performance by holding a door open than it ever will in your car.They are very old tech and the ECU will eventually work around it causing all sorts of problems - near killed my ute and it succeeded in buggering up RG's XR8 meaning it needed a rebuild.

To remove it you will need to get a blanking plug as when they are installed they actually cut the main factory loom - if you unplug the chip without fixing the loom the car will not start. I know Herrods had the diagram of how to fix up the loom but a far easier way to do is to get a plug that plugs in where the Unichip usually goes that will reroute the wiring and make it all ok.

The last time I got one it was from AU1XLS but Im not sure if he has any left.
__________________
RAM 1500
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 05:04 PM   #11
Whoosha
AU DIE HARD
Donating Member1
 
Whoosha's Avatar
 
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the things you do behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by StealthAu
iit all comes down to who's doing the tuning, there are plenty of people that have had unichips and say they are crap, others have used them and say they are great.
Listen to what the man says. if the unit is still functional , and is tuned correctly to suit your cars needs and not just to impress it will work fine, if its dead the new age tuner boxes are by far the better option.if your leaving your car stockish just get the plug for the loom and do a ECU reset and it should learn its Factory tune again .For what it's worth mine has been in for 6 years runs 13s still has only CAI & zorst mods returns 500Ks to the tank round town
__________________

........Age and treachery will ALWAYS overcome youth and skill.......


CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd


.............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES...
..................................................

Quote:
Originally Posted by Riksta
Quote of the weekend: "The quarter mile wasn't as long as I expected it to be".
Whoosha is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 08:16 PM   #12
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

Okay so what is the best thing to do? Is there a unit i can replace it with without doing more damage to the wiring loom? What do you guys use?

What about a X3 FLASH TUNER?
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 08:36 PM   #13
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,616
Default

It really depend's on your budget and what you have planned for the future for your vehicle.
If you have a low budget and don't plan to mod to much and the Unichip is running allright now, I would just leave it be, if it aint broken , you know the rest.
Or if you plan to mod and have the $$$$ , for sure go for the SCT Tune.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 08:45 PM   #14
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

The car has been running like a load of crap for a year now. In that time it has been to many mechanics and had just about every electrical bit replaced. Plus some non electrical bits to. So at a guess it must be this Unichip? Well since the guy at C&V performance laughted after i had told him what is going on with the car and then told him it had the Unichip. All i want is my POWER back and not having to limp the thing.

So what should i do i have about a grand to play with at the moment?????
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 09:33 PM   #15
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,616
Default

I would go for the SCT tune for sure then and get a personal tune to suit your vehicle by someone reputable.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2010, 09:39 PM   #16
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

Has anyone had a Sniper unit?
http://www.bulletperformanceracing.c...-Hardware.html
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 04:17 PM   #17
needaXYGT
AU II XR8
 
needaXYGT's Avatar
 
Join Date: Mar 2006
Location: melbourne
Posts: 978
Default

hi guys, iv decided to ditch the uni chip in my XR8 and just run the stock tune. From what i can see, the unichip just splices into the main loom, and since i cant be bothered finding one of these blank plugs i think ill just re-join the color coded wires. So all i need are the steps to reset the ECU. Are there any problems people have comea across while trying to reset the ECU's?
__________________
AU XR8 II ute
XD FAIRMONT GHIA 302
XA FAIRMONT 302 TOPLOADER
needaXYGT is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 09:50 PM   #18
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by needaXYGT
hi guys, iv decided to ditch the uni chip in my XR8 and just run the stock tune. From what i can see, the unichip just splices into the main loom, and since i cant be bothered finding one of these blank plugs i think ill just re-join the color coded wires. So all i need are the steps to reset the ECU. Are there any problems people have comea across while trying to reset the ECU's?
Since the chip is only an Interceptor (it only intercepts the signal after the ECU sends it, it doesnt actually change what is sent if that makes sense), a simple battery reset should set things right.
Best move you'll make getting rid of the thing. Whoosh I know you swear by yours but Ive seen too many cars get hobbled cos of crap Unichips.
__________________
RAM 1500
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 09:56 PM   #19
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

I tracked down the wiring diagram and have got rid of the Unichip.. The car now revs just need some new sparkplugs as it has foulled up a few.

So what should i replace it with? I am looking at the Sniper unit what do people think?
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 10:46 PM   #20
needaXYGT
AU II XR8
 
needaXYGT's Avatar
 
Join Date: Mar 2006
Location: melbourne
Posts: 978
Default

Just curious as to why you need the wiring diagram?
__________________
AU XR8 II ute
XD FAIRMONT GHIA 302
XA FAIRMONT 302 TOPLOADER
needaXYGT is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 10:53 PM   #21
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

Was not sure on how they where set up. Did not want to start guessing what wire was for what and fry the ECU...
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 10:56 PM   #22
needaXYGT
AU II XR8
 
needaXYGT's Avatar
 
Join Date: Mar 2006
Location: melbourne
Posts: 978
Default

ah ok fair enough. You dont happen to have a copy you could send via email do you?
__________________
AU XR8 II ute
XD FAIRMONT GHIA 302
XA FAIRMONT 302 TOPLOADER
needaXYGT is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2010, 11:39 PM   #23
AU00XR8
AU00
 
Join Date: Sep 2008
Location: Sydney
Posts: 47
Default

This was the web site i found hope it helps.

http://2phast.com/clk32k/engine/unichip-3.jpg

It is simple as to do took me about ten min. after i found that link.
__________________
: http://www.aufalcon.com.au/cgi-bin/index.cgi?act=item&i=549
AU00XR8 is offline   Reply With Quote Multi-Quote with this Post
Old 01-03-2010, 12:03 AM   #24
needaXYGT
AU II XR8
 
needaXYGT's Avatar
 
Join Date: Mar 2006
Location: melbourne
Posts: 978
Default

thanks for that. will be done tomorrow.
__________________
AU XR8 II ute
XD FAIRMONT GHIA 302
XA FAIRMONT 302 TOPLOADER
needaXYGT is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:40 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL