|
|
|
|
|
22-04-2006, 02:30 PM
|
#1 | ||
|
Spin 'em Habib !
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
|
Anyone know how to do this , is it Hard >>
__________________
AU2PWR |
||
|
|
|
22-04-2006, 03:45 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,701
|
It's easy, but involved. There are 6 screws you need to undo. I use an 8mm socket screwdriver to undo them (they are hex head bolts/screws). There are two under the front rubber mat thing (under the radio) on the centre console, two under the rubber mat in the drink holder, and one on each side on the floor at the back of the console. Undo all six, then lift up the console - You should not need to remove it to get the bulb out. Twist the bulb holder out, take yout the spade bulb and put in a new one.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
22-04-2006, 04:02 PM
|
#3 | ||
|
Spin 'em Habib !
Join Date: Jul 2005
Location: Cranbourne Victoria
Posts: 3,854
|
cheers JC
All Done Daniel
__________________
AU2PWR |
||
|
|
|
Replacing Blown Globe On AU Gear Selector
Linear Mode
