|
17-08-2007, 01:25 PM | #1 | ||
Focus Rookie
Join Date: Jul 2005
Location: Sydney
Posts: 518
|
__________________
04' Panther Black Focus Zetec Custom Euro Plates, ST side indicators, MK2 Badges, ST Snorkel, White 17"s, Exhaust, Springs, Volant Intake,Angel Eyes, Body Kit, St170 Lower Grill, F/C Throttle Body, DBA slotters |
||
17-08-2007, 01:39 PM | #2 | ||
Guest
Posts: n/a
|
Asking a bit much IMHO. Although new etc; getting one from a low km wrecked escape/tribute could be a LOT cheaper. Not sure if this has VCT or not.
If the latter, perhaps its a straight dropin to replace the 2.0L Also the ebay article says that its good for supercharging/turbo over the 2.0L; the 2.3L has weaker rods over the 2.0L and where the 2.3L can only take 7-8PSI stock safely, the 2.0 can handle 10-11PSI. |
||
17-08-2007, 01:55 PM | #3 | ||
Old enough to know better
Join Date: Apr 2005
Location: Melbourne
Posts: 2,311
|
Also probably doesn't come with an ecu, and if it did would be tuned differently to a Focus.
Would be interesting to find what a wrecker would charge for a Mazda SP23 engine. Was probably for a Caterham type project...Backed out because it was all too hard with an escape engine?????????
__________________
Manual 2003 Machine Silver 5 Door LR Focus Zetec. Mods: Ford Racing CNC'd cylinder head milled .040", 3 angle valve grind. Ford Racing Stage II camshafts. Ford Racing cam gears. Ford Racing long tube header. Random Technology hi flow cat. Herrod 2.25" stainless cat-back. Pipercross Viper intake. CFM 65mm throttle body. 2000 ported intake manifold. Herrod Custom SCT tune. Eibach suspension. Quaife ATB diff. Wilwood 13" brakes. Custom ST170 leather interior. www.cardomain.com/ride/2773918
|
||
17-08-2007, 02:12 PM | #4 | |||
Guest
Posts: n/a
|
Quote:
If you tried to put the Mazda SP23 engine and its ECU into the LS; the ECU wouldn't match the igntion barrel/key transponder/BEM?. You'd need their ecu as well and possibly the engine loom to be able to control the VCT. |
|||
17-08-2007, 05:47 PM | #5 | ||
Mr Focus
Join Date: Mar 2006
Location: Brisbane, southside, Redlands.
Posts: 575
|
If your looking to mod this engine, Mazda SP23 and Focus 2.3L USA have some different engine parts.
__________________
Cosworth: 2.5" high flow exhaust system, piston & rod 8.5.1 Ford Racing: Tail lights, engine cover, racing wing, cnc'd head, manifold, 70mm tb. Lentech: Torque Convertors with 23 spline input shaft, valvebody Oz racing: WRC OBX: 4-2-1 race header SCT: xcal3, dash scan. |
||