![]() |
|
![]() |
#1 | ||
Starter Motor
Join Date: Sep 2013
Posts: 4
|
could someone please advise how to remove the dipstick tube from WB Festiva
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
what engine does it have in it?
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Sep 2013
Posts: 4
|
1.3 auto
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
Sorry mate, not familiar with the engine, you will have to sus it out, but Usually they are either bolted to the block with bracket somewhere............ or just a tight fit, tapped in carefully with a hammer and a block of wood or a soft hammer, either type can be a tight fit that might take a bit of muscle to get out,
usually a pair of multi grips or pliers, (i would probably stay away from vice grips unless it is a very sturdee tube, you don't wanna crush it !) with a bit of vigorous twisting motion while pulling upwards will get them out, good luck. |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Starter Motor
Join Date: Sep 2013
Posts: 4
|
thank you
|
||
![]() |
![]() ![]() |